您的位置: 标准下载 » 协会标准 » SAE 美国机动车工程师学会 »

SAE AS8025 Passenger Oxygen Mask

作者:标准资料网 时间:2024-05-12 10:33:59  浏览:9337   来源:标准资料网
下载地址: 点击此处下载
Product Code:SAE AS8025
Title:Passenger Oxygen Mask
Issuing Committee:A-10 Aircraft Oxygen Equipment Committee
Scope: This standard establishes the minimum requirements for the design, construction and performance of continuous flow oxygen masks for passenger cabin occupants in civil commercial aircraft. This standard covers oronasal type masks which use a continuous flow oxygen supply. Each such mask comprises a facepiece with valves as required, a mask suspension device, a reservoir, or rebreather bag (when used), a length of tubing for connection to the oxygen supply source, and a means for allowing the crew to determine if oxygen is being delivered to the mask. The assembly shall be capable of being stowed suitably to meet the requirements of its intended use.
下载地址: 点击此处下载
基本信息
标准名称:刑事影像技术专业实验室工作用房技术要求
英文名称:Technical code for forensic image laboratory
中标分类: 综合 >> 社会公共安全 >> 犯罪鉴定技术
ICS分类: 环保、保健与安全 >> 犯罪行为防范
发布部门:中华人民共和国国家质量监督检验检疫总局 中国国家标准化管理委员会
发布日期:2008-07-07
实施日期:2009-01-01
首发日期:
作废日期:
提出单位:全国刑事技术标准化技术委员会刑事照相录像标准化分技术委员会(SAC/TC179/SC5)
归口单位:全国刑事技术标准化技术委员会(SAC/TC 179)
起草单位:公安部物证鉴定中心、中国人民公安大学、北京人民警察学院、北京市公安局、上海市公安局
起草人:许小京、俞涛、杨玉柱、庄京伟、吴伟、蔡能斌
出版社:中国标准出版社
出版日期:2008-08-01
页数:8页
书号:155066·2-18993
适用范围

本标准规定了刑事影像技术专业实验室工作用房的分类要求,以及各类工作用房的采光、通风、上下水、网络、电气要求和环保要求。
本标准适用于刑事技术部门影像技术专业设计、建造专业实验室工作用房。

前言

没有内容

目录

没有内容

引用标准

下列文件中的条款通过本标准的引用而成为本标准的条款。凡是注日期的引用文件,其随后所有的修改单(不包括勘误的内容)或修订版均不适用于本标准,然而,鼓励根据本标准达成协议的各方研究是否可使用这些文件的最新版本。凡是不注日期的引用文件,其最新版本适用于本标准。
GB50174—1993 电子计算机机房设计规范
JGJ25—2000 档案馆建筑设计规范

所属分类: 综合 社会公共安全 犯罪鉴定技术 环保 保健与安全 犯罪行为防范
Product Code:SAE J19
Title:Latex-Dipped Goods and Coatings for Automotive Applications
Issuing Committee:Committee On Automotive Rubber Specs
Scope:These specifications cover dipped goods and coatings made from compounded latex. Products manufactured from this material include boots, coated clips, coated sponge parts, and coated fabrics for automotive applications.The compounds listed in Tables 1 and 2 are grouped into classifications based primarily on physical properties which are prescribed in the tables. These values, together with any additional requirements, indicated by suffix letters in the grade designations as described in Section 3, define the properties of the compounds after vulcanization. These values apply to test specimens obtained from standard laboratory dipped films prepared in accordance with procedures described in the applicable ASTM test methods. Test results from finished products may not duplicate the values obtained from standard test films. When differences due to the difficulty in obtaining suitable test specimens from the finished part arise, the purchaser and the supplier may agree on acceptable deviations. This can be done by comparing results obtained on standard test films with those obtained on actual parts.